> ## Content Index
> Fetch the complete content index at: https://www.victocraft.com/llms.txt
> Use this file to discover other available public pages before exploring further.

# Oak Barrel Wood Coasters with CNC Recesses and Laser Marking
- URL: https://www.victocraft.com/en/oak-coaster-cnc-laser-engraving-en/
- Published: 2026-09-08T03:16:27.000Z
- Updated: 2026-09-08T03:19:20.000Z
- Description: Square coasters made from oak barrel wood have CNC-machined circular cup recesses and laser-marked artwork. The wood is finished with a clear coating and paired with a storage box.
- Author: VICTOCRAFT
- Tags: #lang-en, Wooden Coasters, CNC Wood Machining, Laser Marking

These square coasters are made from oak barrel wood. A circular cup recess is machined into each centre by CNC machining, and the artwork is laser-marked on the recessed surface. The wood is finished with a clear coating and paired with a square storage box.

## CNC Cup Recesses and Laser Marking in Oak

The main photograph shows two square coasters with visible wood grain. CNC machining creates a circular recess where the base of a cup can sit. The lettering artwork is laser-marked on the floor of the recess. A clear coating is applied after machining and marking. The coasters are used on a tabletop and can be kept in the storage box between uses. Outer dimensions, recess shape, marking artwork and finish can be discussed for the project. Another wood-surface marking example appears in the [laser-marked wood-veneer display panels](https://www.victocraft.com/en/woodgrain-laser-engraved-display-en/).

![A square oak wood coaster with a circular recessed centre and laser marking beside a dark square storage box](https://storage.ghost.io/c/62/47/624723ac-8e4d-4b1b-a969-1518ff441ce3/content/images/2025/10/IMG_9624-1.JPG)

A finished oak barrel wood coaster paired with its square storage box.

## Recess Detail and Square Storage Box

The photograph shows one coaster beside its square storage box. The darker grain around the outside surrounds a lighter circular recess, with laser-marked lettering at the bottom. The CNC recess and the surface marking are visible together, while the box provides a place to store the finished coaster.

## Discuss Your Wooden Coasters

Share the outer size, quantity, cup-recess shape, laser-marking artwork and preferred surface finish. Include the storage-box arrangement so the machining, marking and presentation can be considered together. [Send a fabrication inquiry](https://tally.so/r/gD62QM?ref=victocraft.com).