Rainbow Film Acrylic Hanging Boards with Clear Brackets
Laser-cut 10 mm acrylic boards with rounded ends, rainbow film and clear acrylic brackets for wire hanging. Two workshop views show the finish and bracket positions.
These hanging display boards were laser-cut from 10 mm (10T) acrylic with long outlines and rounded ends. Rainbow film covers the surfaces, and clear acrylic brackets provide connection points for wire hanging.
Laser-cut acrylic boards with rainbow film
The main photograph shows several finished boards arranged on a workbench. Their outlines were laser-cut to the drawings before rainbow film was applied to the flat faces. Blue, green, yellow, orange and pink areas appear across the different boards, with the film direction varying between pieces. Clear acrylic brackets are fitted at the specified positions for the hanging connections. Board dimensions, quantities, end shapes, film direction and bracket positions can be discussed together with the hanging heights and spacing for a shop or exhibition display. The photographs document the workshop condition before installation.
Positioning the clear hanging brackets
The closer photograph shows the boards overlapping lengthwise on the workbench, with the clear brackets visible against their colourful surfaces. Long rectangular brackets and round attachment points sit at different positions along the boards and their edges. This view records the bracket placement after the rainbow film was applied, ahead of connection to the hanging wires.
Related fabrication: Custom acrylic display stands and retail displays.
Discuss a hanging display
Share the finished board dimensions, quantity, acrylic thickness and outline drawings. Include the preferred rainbow film direction, clear bracket locations, wire hanging heights and spacing so the fabrication scope can be reviewed. Send a project inquiry.
