Sign in Subscribe

Gold-Film Acrylic LED Sign with Nine Panels

A nine-panel acrylic sign finished with gold decorative film. Internal LEDs illuminate the cut-out lettering and panel edges, with a separate black foam PVC lightbox application.

Nine gold-finished acrylic panels arranged in a grid with illuminated cut-out lettering and light along the panel gaps and edges
The nine-panel acrylic sign lit from inside, with gold decorative film on the faces and light through the lettering and panel edges.

This indoor sign uses acrylic panels with a gold decorative film finish and laser-cut lettering. Internal LEDs light the letter openings and the gaps and edges around the divided panels. The final photograph shows a separate illuminated box made from black foam PVC.

Nine acrylic panels with a gold film finish

The main photograph shows nine panels arranged as a three-by-three grid with the lighting switched on. Cut-out lettering and illuminated lines across the panel divisions form the sign. The gold surface comes from decorative film applied to acrylic. Panel arrangement and letter artwork can be planned for store or indoor signage. For another acrylic lighting application, see the illuminated acrylic display box.

An oblique view of nine gold-film acrylic panels with cut-out characters and illuminated lines between the panels
Another view of the illuminated panel arrangement, showing the lettering and light around the panel edges.

The panel grid with the LEDs on

Viewed from another angle, the same nine-panel layout shows the cut-out lettering and light along the panel edges. The separate gold faces read together as one sign, while the lit gaps make the divisions visible.

The nine gold-film acrylic sign panels with the LEDs off, showing the gold surfaces and dark letter openings
The unlit sign shows the gold decorative film finish and the laser-cut letter openings.

Gold surfaces with the lighting off

With the LEDs switched off, the gold decorative film and letter openings remain visible. This photograph shows the surface finish in ordinary room light, allowing the unlit appearance to be compared with the illuminated views.

Two views of a black foam PVC box sign with internal light visible through CNC-cut lettering
A separate foam PVC box application with CNC-cut lettering and internal LED lighting.

A CNC-cut foam PVC lightbox

This separate application uses a black foam PVC box. The lettering is cut into its front by CNC machining, with LEDs inside the box. Light comes through the letter openings against the black face. The combined photograph shows the lit box from two angles.

Discuss a panel LED sign

Share the finished size, quantity, intended use and artwork. Include the panel arrangement and cut-out lettering so that the surface finish and lighting layout can be considered together. Discuss your project.