Sign in Subscribe

PVC Foam Board Product Displays with a Curved Header and Printed Graphics

CNC-cut PVC foam board forms a curved header, round product openings and lower grid compartments. Separate examples show divided stands, mask-pack displays, replaceable lipstick backdrops and wood-patterned film finishes.

Two PVC foam board product displays with curved green graphic headers, wood-patterned surfaces, round openings and lower grid compartments
Curved headers, round openings and lower compartments on displays finished with wood-patterned and green printed graphics.

This product display uses CNC-cut PVC foam board with applied printed sheets. A curved header rises above the box-shaped body, with round openings in the upper holding area and grid compartments below. Wood-patterned surfaces and green graphics form the exterior finish.

A curved header with round openings and lower compartments

The main photograph shows two displays with the same curved header design. CNC cutting forms the header, side panels and body components before the printed sheets are applied. The round openings and lower grid divide the product-holding areas within the stand.

For other retail display treatments, see the pink acrylic cosmetic display and the illuminated PVC foam board stand.

A divided white PVC foam board product stand with several rows of compartments and black printed graphics across the front
A separate general product stand with white dividers and a printed front panel.

A separate divided stand with printed front graphics

This general product stand has a white PVC foam board body divided into several holding areas. Printed graphics cover the black front face. Its compartment layout is for separating products and is not limited to a particular type of cosmetics.

Several PVC foam board retail displays with upright printed headers and product-holding areas, including blue mask-pack stands at the rear
Separate printed display stands shown together in the workshop, including the mask-pack example.

Separate mask-pack displays with CNC angle-cut parts

The workshop photograph shows several printed retail display designs, including blue mask-pack stands at the rear. The mask-pack example uses PVC foam board parts cut at an angle by CNC, with printed graphics attached to the front and header. It is a separate design and application from the curved-header stand in the main photograph.

Black PVC foam board lipstick stands with square product openings and printed backdrops held by visible round standoff fittings
A separate lipstick display with a replaceable backdrop and printed inserts.

A lipstick stand with a replaceable printed backdrop

Black PVC foam board is CNC-cut to form the lipstick stand and its backdrop structure. Square openings divide the product positions. The backdrop is held with standoff fittings so it can be replaced, and printed inserts provide the display graphics. This is a separate lipstick display example.

Several rectangular and divided PVC foam board display trays covered with wood-patterned interior film on a workbench
Separate display forms finished with wood-patterned interior film.

Wood-patterned interior film on separate display forms

These tray-shaped and divided displays use PVC foam board bodies covered with interior film. The wood appearance comes from the applied film. Different film colours and patterns can change the exterior finish while retaining a PVC foam board structure.

See more fixtures in the display portfolio.

Discuss a product display

Share the finished size, quantity, intended products and a drawing or reference design. Include the desired header shape, product-holding layout and printed graphics or film finish so the display can be reviewed. Discuss your project.